Journal  

[ Home ] [ Journal ] [ Past Boats ] [ Favorite Tools ] [ My Shop ] [ Wooden Boat School ] [ Side Trips ] [ Contact Me ] [ Other Builders ]

July 27, 2002 - Cutting out the Anchor Locker Bulkhead:  I did a pre-assembly  inventory and found that I was short the Anchor Locker Bulkhead.   I scarfed two remnants for this item.

I need a straight edge before I can transfer the lines for the bulkhead.	The plans call for a hole in the bulkhead.   Here I make sure that the anchor will fit through the hole!

Neighbor and good friend Hatch and I pose with the finished bulkhead.

I don't look forward to my next job - sanding all of the planks and bulkheads.  More to follow.

[ Back ] [ Next ]

[ Home ] [ Journal ] [ Past Boats ] [ Favorite Tools ] [ My Shop ] [ Wooden Boat School ] [ Side Trips ] [ Contact Me ] [ Other Builders ]